What should be pay attention to before installing the industrial gas valve?

I believe that we have a certain understanding of the service life of the valve, I am explaining a little knowledge about the valve, the valve is in the fluid system, used to control the direction of the fluid, pressure, flow of the device is to make the pipeline and equipment within the medium (liquid, gas, powder) flow or stop and can control its flow device. Also has a cut-off, regulation, inflow, prevent backflow, pressure stabilization, diversion or overflow pressure relief and other functions. In order to extend the life of the industrial gas valve, there are also many precautions in use.

This passage is going to talk about the followings of the industrial gas valve:

1) Why do I need to maintain the industrial gas valves?

2) How to maintain your industrial gas valves?

3) Life span of the industrial gas valve

1) Why do I need to maintain the industrial gas valves?

The failure of industrial gas valves, which are an important part of gas pipelines, can cause difficulties in production operations and increase the chance of accidents.

The presence of contaminants in the gas pipeline causes the soft (hard) seal between the valve seat and the valve ball to be frequently washed by airflow or particles, resulting in valve leakage.

How to protect the seal of the valve seat and ball is currently a key issue in the maintenance of industrial gas valves.

Lack of maintenance industrial gas valves can lead to loss of function due to metal corrosion, hardening of soft materials, etc. Therefore, it is very important to understand the precautions for maintenance and use of the industrial gas valve.

2) How to maintain your industrial gas valves?

The correct selection of the INDUSTRIAL GAS VALVE is important in the design phase of the project. It is important to have clear requirements for materials, accessories, testing standards, etc. When the seal grease joint, internal check valve, valve bleed / drain joint size and type is clear. The valve should be adequately protected during the factory, transportation, and installation at the observation site of the industrial gas valve.

For maintenance time, industrial gas valve into operation that should be measured before reading the door for maintenance, in the construction process after each activity of the valve, after the end of the valve welding, after the hydraulic test, after the end of commissioning should be maintained. Put into production within a year of quarterly maintenance, after two years of production every six months maintenance once. After two years of production, maintenance should be carried out once a year.

3) Life span of the industrial gas valve

Industrial gas valve several years (for example, 3 ~ 5 years), due to long-term not open, not used, in this case, the performance will be greatly halved, and will appear many small hairs small disease. If you require a better seal, it is recommended that you use the ball valve will be better, industrial gas valve is a lubricant, if long periods of inactivity, the valve's lubricant will fail.

There is another situation is that if the industrial gas valve is cheaper (lighter), it is better to replace it. General valve internal parts normal use life is also three or five years, it is recommended that regular replacement.

The key or use, even if the valve does not usually need to operate the valve should be regularly switched on and off to understand its performance changes. This should become a system.

The most cost-effective is that you choose the right material and high-quality valve brand, such as SIAN, when you choose the industrial gas valve.