Installation Requirements and Installation Environment of Cl2 Cylinder Valve

Industrial valves are devices used to control the direction, pressure, and flow of fluids in fluid systems, to flow or stop media (liquids, gases, powders) in pipes and equipment, and to control their flow. Industrial gas valves refer specifically to gas control devices. The industrial gas valve is the control part of the pipeline fluid conveying system, which is used to change the cross-section of the passage and the direction of the medium flow, and has the functions of inflow, cut-off, throttling, check diversion, or overflow pressure relief. The Cl2 Cylinder Valve is an essential element in ensuring the safe use of chlorine gas. So for you to use chlorine gas safely and effectively, our company manufactures a very reliable Cl2 Cylinder Valve.

Here is the content list:

• Industrial Gas Valve Installation Requirements

• Attention should also be paid to the installation environment of industrial gas valves

Industrial Gas Valve Installation Requirements

Cl2 is a gas to be treated strictly, so be very careful when installing the Cl2 Cylinder Valve.

1. Before installing the industrial gas valve, carefully check whether the model, specification, and design of the valve used are consistent.

2. Check whether the valve can be used under the required conditions according to the type of industrial gas valve and factory instructions.

3. When the industrial gas valve is hoisted, the rope should be tied at the flange connection between the valve body and the valve cover, not on the handwheel or valve stem, so as not to damage the valve stem and handwheel.

4. When the industrial gas valve is installed in the horizontal pipeline, the valve stem should be vertically upward, and the valve stem should not be installed downward.

5. The installation of industrial gas valves shall not be connected by raw or strong pulling to avoid damage caused by uneven force.

For our Cl2 Cylinder Valve installation, you can contact us and our experienced staff will provide you with the best installation assistance and advice.

Attention should also be paid to the installation environment of industrial gas valves

Cleaned Cl2 Cylinder Valve parts must be kept sealed for installation.

1. The installation workshop must be kept clean, or set up a temporary cleaning area, such as using newly purchased colored cloth or plastic film, etc., to prevent dust from entering during the installation process.

2. Workers who assemble the Cl2 Cylinder Valve must wear clean cotton overalls, and cotton caps, hair can not leak, feet wear clean shoes, and hands wear plastic gloves, and degreased.

3. The tools for assembling the Cl2 Cylinder Valve must be degreased and cleaned before assembly to ensure cleanliness.

If you are interested in purchasing Cl2 Cylinder Valve, visit our website:https://www.sianvalves.com/to get more professional information about Cl2 Cylinder Valves. We will welcome you with high-quality products and good service as well as low prices! To provide comprehensive technical support to our customers, we will provide technical and other related information promptly upon request.